Product Overview
The Hytera E-pack100 TETRA is a TETRA DMO mesh repeater for 380–430 MHz, with a maximum network of three nodes and adjustable 1/5/10 W output.
Key Features
- Private Network Mode: TETRA DMO Mesh
- Node Capacity: 3
- Output Power: 1/5/10 W adjustable
- Battery Capacity: 185Wh (12.5Ah)
- Battery Life: No Less than 10 hours (15% transmission)
Key Specifications
| Manufacturer | Hytera |
|---|---|
| Model | E-pack100 TETRA |
| Frequency | 380-430 MHz |
| Private Network Mode | TETRA DMO Mesh |
| Channel Spacing | 25 kHz |
| Node Capacity | 3 |
| Output Power | 1/5/10 W adjustable |
| Operating Voltage | Rated 14.8V |
| Battery Capacity | 185Wh (12.5Ah) |
| Battery Life | No Less than 10 hours (15% transmission) |
| Dimensions | 295 x 187x 68mm |
| Weight | 3.6 kg (With Battery) |
| Ingress protection (manufacturer description) | IP67 |
| Vocoder | ACELP |
| Standby current | Less than 0.8 A |
Functions and Deployment
- Forms a self-configuring TETRA DMO mesh with up to three nodes.
- The manufacturer describes vehicle, backpack, pole and wall deployment; the mounting and power kit must match the installation.
Configuration and Ordering
Confirm exact hardware, operating band, channel plan, antenna, power supply, batteries and enabled software. Coverage depends on terrain, antenna placement and network design. Confirm TETRA DMO mesh interoperability and the three-node limit. The listed BL9903 battery is discontinued; obtain an approved battery and a frequency-matched antenna.
Quotation Requirements
Specify the three-node TETRA DMO topology, 380-430 MHz channel plan and matching antenna. Confirm an approved replacement for the listed EOL BL9903 battery and all charging/mounting components. Do not substitute the E-pack200 DMR protocol or 31-node specification.
Request a Quote
Contact MARS SC with the deployment country, coverage requirements and required E-pack100 TETRA configuration.
