Product Overview
Select the EN8012Ts-20 for an XGS-PON wired handoff with a separate CATV requirement. Its XGS-PON uplink terminates the fiber service, while one 10GE port and CATV determine how local equipment connects. Wireless coverage can be designed independently using a separate access point.
Key Features
- Optical access: XGS-PON, to be qualified on the target OLT and operator service profile.
- Local connections: one 10GE port and CATV.
- Wireless planning: No built-in Wi-Fi; select the access point and coverage plan separately.
- Selection detail: Both are documented with a 10GE handoff and no Wi-Fi. EN8012Ts-20 additionally lists CATV; confirm that the operator supplies the corresponding TV service.
Specifications
| Brand | Huawei |
|---|---|
| Model | EN8012Ts-20 |
| Product family | OptiXstar |
| Product type | XGS-PON ONT |
| Access standard | XGS-PON |
| Wi-Fi | No Wi-Fi |
| Wi-Fi bands | — |
| Interfaces | 1x 10GE + 1x CATV |
| SIM / external antenna | No SIM |
| Region / variant | International / Huawei Enterprise |
Specifications describe the referenced model. Confirm the supplied hardware and firmware for the destination network. Wireless rates are theoretical link rates, not guaranteed internet throughput.
Applications
- Project fit: An XGS-PON wired handoff with a separate CATV requirement.
- Operator rollouts: qualify a sample on the intended OLT, authentication method and service profiles before ordering a deployment quantity.
- Replacement planning: match both optical access and local interfaces, then arrange operator approval before swapping an existing ONT.
Before You Order
For a useful compatibility check and quotation, include:
- XGS-PON service, OLT vendor/model and software version.
- ONT registration method, OMCI requirements, VLANs and bridge/routing design; do not send account passwords.
- Required wired link speeds, wireless coverage and any provisioned voice or TV service.
- Quantity, destination, firmware requirements, optical connector and power-plug type.
Discuss your EN8012Ts-20 requirements
Frequently Asked Questions
How does it differ from EN8010Ts-20?
Both are documented with a 10GE handoff and no Wi-Fi. EN8012Ts-20 additionally lists CATV; confirm that the operator supplies the corresponding TV service.
Can it replace any fiber modem?
No. XGS-PON support alone does not establish interoperability. The operator must accept the ONT and apply the correct authentication and service profiles.
Does the interface speed guarantee internet throughput?
No. Port rates and wireless link rates are not guaranteed internet speeds. The service plan, provisioning, network load and connected equipment all matter.
Is a separate router required?
Choose the routing or bridging arrangement with the service provider. The presence of an Ethernet interface does not establish the required routing mode or operator configuration.
Product Reference
Manufacturer product information. Product illustrations are reference images; supplied hardware and regional versions should be confirmed before ordering.
