Key Features
RUGGED AND RELIABLE
The BD615 features a bold two-colour design and is tested to meet the Military Standards of 810 G, including temperature shock management and vibration handling. The BD615 is also IP66 certified for dust and waterproof and its design guarantees reliability in different environments.
CLEAR VOICE
Fitted with the latest digital encoding and correction technology, the BD615 caters for human voice to be transmitted clearer and without distortion, even over greater distances.
EXCELLENT PERFORMANCE
With a new, innovative design, the BD615 offers better performance than traditional analogue radios. With excellent reception sensitivity, it means the device can provide a stable communication with no interference.
ANALOGUE AND DIGITAL
The BD615 can support both analogue and digital modes on the same hardware. You can easily switch between dual operation modes which helps you to communicate with more devices.
| General data | |
|---|---|
| Frequency Range | UHF:400-470 MHz; VHF:136-174 MHz |
| Channel Capacity | 48 |
| Zone Capacity | 3 |
| Channel Spacing | 25 kHz/12.5 KHz |
| Operating Voltage | 7.2 V(rated) |
| Battery | 1500 mAh(Li-Ion) |
| Battey Life(5/5/90 Duty Cycle,High TX Power) | Digital:16 hours; Analog:12 hours |
| Frequency Stability | ±0.5 ppm |
| Antenna Impedance | 50 Ω |
| Dimensions(H×W×D) mm | 108 mm×54.5 mm×28 mm |
| Weight | 240 g (With standard battery and antenna) |
| Receiver | |
|---|---|
| Sensitivity(Analog) | 0.4 μV (20 dB SIN AD); 0.22 μV (typical)(12 dB SIN AD) |
| Sensitivity(Digital) | 0.22 μV/BER 5% |
| Adjacent Channel Selectivity | TIA-603：60 dB @ 12.5kHz/70 dB @ 25 kHz |
| Intermodulation | TIA-603：65 dB @ 12.5 / 25 kHz |
| Spurious Response Rejection | TIA-603：65 dB @ 12.5 / 25 kHz |
| Blocking | ETSI 84 dB |
| Hum&Noise | 40 dB @ 12.5 kHz ; 45 dB @ 25 kHz |
| Rated Audio Power Output | 0.5 W |
| Rated Audio Distortion | ≤3% |
| Audio Response | +1~-3 dB |
| Conducted Spurious Emission | <-57 dBm |
| Transmitter | |
|---|---|
| RF Power Output | UHF1：4 W/1 W; VHF：5/1 W |
| FM Modulation | 11K0F3E @ 12.5 kHz; 16K0F3E @ 25 kHz |
| 4FSK Digital Modulation | 12.5 kHz Data Only:7K60FXD; 12.5 kHz Data & Voice:7K60FXW |
| Conducted/Radiated Emission | -30 dBm > 1 GHz; -36 dBm < 1 GHz |
| Modulation Limiting | ±2.5 kHz @ 12.5 kHz; ±5.0 kHz @ 25 kHz |
| FM Hum&Noise | 40 dB @ 12.5 kHz; 45 dB @ 25 kHz |
| Adjacent Channel Power | 60 dB @ 12.5 kHz; 70 dB @25 kHz |
| Audio Distortion | ≤3% |
| Digital Vocoder Type | SELP |
| Digital Protocol | ETSI-TS102 361-1,-2,-3 |
| Environmental Specs | |
|---|---|
| Operating Temperature | -30℃~+60℃ |
| Storage Temperature | -40℃~+85℃ |
| ESD | IEC 61000-4-2(level 4); ±8 kV(Contact); ±15 kV(Air) |
| MIL Standard | MIL-STD-810 G |
| Dust & Water Protection | IP66 |
| Humidity | MIL-STD-810 C/D/E/F/G |
