Icom IC-A16E Air Radio

8.33/25 kHz Ground to Air Radio with Class Leading 1500 mW Powerful Audio

Description

General

Frequency rangeTX/RX : 118.000–136.992 MHz
Number of memory channels200 channels
Channel spacing8.33 kHz*/25 kHz (* May differ depending on the country.)
Type of emission6K80A3E, 5K00A3E
Power supply requirement7.2 V DC
Current drain (approximate)TX High1.8 A
RXStand-by65 mA typical
Max. audio650 mA
Antenna impedance50 Ω (BNC type antenna connector)
Operating temperature range–20°C to +55°C
Dimensions (W×H×D)
(Projections not included)
52.2 × 111.8 × 34.1 mm (with BP-280)
Weight (approximate)257 g (with BP-280)
 

Transmitter

Output power (at 7.2 V DC)6.0 W (PEP), 1.8 W (carrier)
Audio harmonic distortionLess than 10% (at 85% + 3 dB modulation)
Harmonics spurious emissionsLess than –36 dBm
(Except for operating frequency ±1 MHz.)
Frequency stability±1 ppm
 

Receiver

Intermediate frequencies

46.35 MHz (1st), 450 kHz (2nd)

SensitivityLess than 0 dBμ
(at 12 dB SINAD with CCITT)
Squelch sensitivity (Threshold)Less than 0 dBμ
Spurious responseMore than 70 dB
Hum and noiseMore than 40 dB (at 90% modulation)
Audio output powerINT SP1500 mW typical
EXT SPMore than 350 mW
(AM 8 Ω 60% modulation at 10% distortion)
External speaker connector3 conductor 3.5 (d) mm

 

Measurements made in accordance with EN300 676-2.

 

Applicable U.S. Military Specifications

Standard
 
MIL-810 G
MethodProcedure
Low Pressure500.5I, II
High Temperature501.5I, II
Low Temperature502.5I, II
Temperature Shock503.5I-C
Solar Radiation505.5I
Rain Blowing/Drip506.5I, III
Humidity507.5II
Salt Fog509.5
Dust Blowing510.5I
Immersion512.5I
Vibration514.6I
Shock516.6I, IV

 

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

 

Applicable IP Rating

Ingress Protection Standard
Dust and WaterIP67/IP54


 

 

Supplied Accessories

・    BP-280 battery pack
・    BC-213 rapid charger
・    BC-242 AC adapter
・    FA-B02AR antenna
・    MB-133 belt clip
・    Hand strap

Shopping Cart
Scroll to Top